[How To] Easy Installation Guide for Your Electric Bike Kit

Easy Installation Guide for Your Electric Bike Kit

 

Battery and Controller Box:

  • Mount the battery on your bike.
  • Find a place to fit the controller box with the controller inside.

 

Display:

  • Attach the display to your handlebar.

Pedal Assist Sensor:

  • No need to remove the crank.
  • Install the sensor directly on the electric bike axle using a zip tie.
  • Position the sensor on the left side of the seat tube near the bottom bracket.

 

Magnetic Steel Plate:

  • Assemble the two pieces of the magnetic steel plate as shown in the diagram.
  • Secure with a circlip.

 

Brake Sensors:

  • Can be installed on any brake type.
  • Use the sticker to attach the magnet and sensor to the brake lever.
  • Align the sensor with the magnet, keeping a 0.5 cm distance between them.
  • When you pull the brake, the Brake Sensor sign will appear on the display.

  • Use the sticker to attach the magnet and sensor to the brake lever.

  • Align the sensor with the magnet, keeping a 0.5 cm distance between them.

  • When pulling the brake, the Brake Sensor sign appear on the display

 

Cassette/Freewheel:

  • Swap your current cassette from the wheel and fit it to the hub.
  • Use a cassette removal tool to remove it.
  • Freewheels typically have 6-7 speeds, while cassettes have 8+ speeds.

 

  • Use a cassette removal tool to remove it.

 

  •  Wiring Diagram:
  •     Refer to the KT wiring diagram for proper connections.

bafang rear hub motor wiring diagram